A clogged toilet is a common plumbing problem. If you would like to know how to unclog a toilet fast then this article is for you. This can be fixed by following a few simple steps.
First, the toilet will need to be emptied of any remaining water and then the plunger needs to be inserted into the bowl and pushed down until it covers the hole at the bottom of the toilet. The plunger will then need to be pulled up and down in order to create suction that will pull up all of the clogs. It is important not to use too much force or this could break your toilet.
A plunger should not be used if there are more than three inches of water in your toilet because this could cause it to overflow. Instead, you should contact a professional plumber from Houston who has experience with fixing clogged toilets or installing the toilets properly.
How the 3 Best Ways to Unclog a Clogged Toilet Work
Some of the best ways to unclog a clogged toilet are using a plunger, using a chemical drain cleaner, and using an auger.
The plunger is one of the most common and cheapest ways to unclog your toilet. To use it, you need to place the suction end of the plunger over the hole in your toilet bowl and then pump up and down. The suction created by this action will create enough pressure for water to flow through your pipes again.

Chemical drain cleaners are also effective for unclogging toilets quickly. These chemicals can be bought at any hardware store or supermarket and they work by breaking down any organic matter that is causing your clog. Be careful not to use too much as this can cause damage to your pipes or se
Option 1: The Good Ol’ Plunge
The plunger is the most common and cheapest way to unclog a toilet. It’s a simple tool that you can use to create a seal and then push water down the pipe.
There are two kinds of plungers:
– The cup plunger, which is the one you see in cartoons, with a round suction cup on the end.
– The flat plunger, which has a flat rubber end.
The cup plunger is better for smaller clogs while the flat plunger is better for larger ones because it creates more suction and can move more water in one plunge.
Option 2: Pot and String Trick
This is a trick that many people have used in the past. It is not the most effective way to unblock your toilet, but it can be very helpful in some situations.
The string will go down through the toilet drain and will create a “pot” at the bottom of the pipe. This will create enough suction to remove any blockages from the pipe. However, this method can only work if there are no bends or other obstructions in the pipe.
Option 3: Using Commercial Drain Cleaner with Hydrogen Peroxide
Commercial drain cleaner is an effective way to clean your toilet.
Commercial drain cleaner is a chemical that is designed to dissolve and remove clogs in drains. It can also be used as a cleaning agent for toilets, sinks, and bathtubs. The active ingredient in many commercial drain cleaners is sodium hydroxide, or lye.
Hydrogen peroxide can also be used as a cleaning agent for toilets. Hydrogen peroxide breaks down organic waste and kills bacteria on contact. It’s important to use hydrogen peroxide diluted with water because it can cause skin irritation if it’s not diluted enough.
Conclusion:
So after reading this article you can know how to unclog toilet when nothing works.